cisco

cisco

Configurar EIGRP en Firewall ASA

Security
Create an EIGRP routing process asa-jmcristobal(config)# router eigrp as-num Configure the interfaces and networks that participate in EIGRP routing: asa-jmcristobal(config-router)# network ip-addr [mask] We can configure one or ...
Read more 0

Upgrade Firepower Threat Defense desde el FMC

Security
Equipment to be used: FMC 2600 with version 6.6.4FTD 2130 with version 6.4.0.10 The objective is to upgrade the FTD to version 6.6.4 through the FMC. Before you ...
Read more 0

Gestión remota de Cisco ASA - SSH/ASDM

Security
By default SSH, telnet or https management is disabled. First of all we must have configured the management interface of the equipment, something similar to: ASA-JMCristobal# sh run ...
Read more 0

EIGRP

Enterprise Infrastructure
EIGRP (Enhanced Interior Gateway Routing Protocol) is an advanced vector distance protocol, an enhanced version by Cisco’s proprietary Interior Gateway Routing Protocol (IGRP). EIGRP uses the same algorithm ...
Read more 0

STP: Multiple Spanning-Tree

Enterprise Infrastructure
MST is a standard published by the IEEE to create different STP instances for groups of VLANs to have more than one STP topology approaching the Cisco mechanisms ...
Read more 0

STP: Configuración de Rapid PVST+

Enterprise Infrastructure
The iEEE 802.1w standard was developed using the main concepts of 802.1d (Common Spanning-Tree) but with a faster convergence time. It can be applied to single or multiple ...
Read more 0

STP: Features de protección

Enterprise Infrastructure
Root Guard The Root Guard feature was developed as a means to control when a candidate root bridge switch connects to the network. It records the bridge ID ...
Read more 0

STP: Métodos de optimización

Enterprise Infrastructure
Some additional methods allow faster STP convergence if a link failure occurs. Portfast Allows fast connectivity on ports by immediately switching to the Forwarding state without going through ...
Read more 0

STP: PVST+ configuration

Enterprise Infrastructure
PVST+ (Peer-VLAN Spanning-Tree) First of all, let’s remember: Common spanning-Tree (CST) only handles one instance of STP on switches, based on 802.1Q trunks, by default over vlan 1 ...
Read more 0

STP – Timers, Port Roles and States

Enterprise Infrastructure
Choosing root ports Once the root bridge is chosen, a Root Port must be chosen for each switch, which is not the root bridge. The root port always ...
Read more 0

STP Overview

Enterprise Infrastructure
Spanning-Tree Protocol can exist between two devices (switches). Multiple active paths between devices cause loops in the network. STP is a layer 2 link management protocol that provides ...
Read more 0

Etherchannel PAgP y LACP

Enterprise Infrastructure
The audio of the video is only in Spanish EtherChannels can be negotiated between two switches; there are two protocols for this negotiation: PAgP and LACP. PAgP (Port ...
Read more 0

Etherchannel Overview

Enterprise Infrastructure
Etherchannel, also known as Link Aggregation, is a technology that allows grouping several physical interfaces that connect a pair of devices; when the etherchannel is established, the devices ...
Read more 0

VTP – VLAN Trunking Protocol

Enterprise Infrastructure
VTP uses Layer 2 trunk links to communicate VLAN information within a group of switches. VTP manages the addition, deletion, and renaming of vlan names by sending VTP ...
Read more 0

DTP – Dynamic Trunking Protocol

Enterprise Infrastructure
DTP is cisco’s proprietary protocol for negotiating trunking mode between two switches. A trunk link can only be negotiated between two switches if both belong to the same ...
Read more 0
es_ES